1 x 48 Eldorado M-75-1041 Precision Deep Hole Gun Drill mounted on Richards Horizontal Boring Mill


1" x 48" Eldorado M-75-1041 Precision Deep Hole Gun Drill mounted on Richards Horizontal Boring Mill

Stock Number: hsd1129

Serial No. 885      Age: 1981


                                                              



SpecificationDescription
Drilling Diameter Maximum1"
Drilling Diameter Minimum.0550"
Maximum Drilling Depth48"
Spindle Speeds480-3895 RPM
Feed Rate Drilling1-99.9 IPM
Feed Rate Rapid200 IPM
Work Table36" x 60"
Height of Spindle Centerline0-24"
Straightness per 12".001"
Coolant Pressure, Maximum1500 PSI
Reservoir Capacity90 Gallon
Coolant Flo18 GPM
Filtration5 Micron

Equipped With:
Motor Driven With 1.5 HP, 3 Phase, 60 Cycle 208/230/460 Volt Spindle Drive. 1145 RPM. 7.5 HP 3 Phase 60 Cycle Coolant System. Complete Electrical Controls. Ball Screw Driven Drill Feed. Eldorado F18 "Mega Flo" High Pressure Coolant System With Filtration And Heat Exchanger. Ball Screw Driven Headstock Feed System. Chip Box. (2) Whip Guides. Sony 3-Axis DRO for Table Position and Vertical Head Position. The Drill Is Mounted On A Richards Boring Mill Machine Base With A 36" x 60" T-Slotted Table. There Is Approximately 64" Longitudinal Table Travel and 24" Vertical Spindle Travel. 42" x 42" Auxiliary T-Slotted Table.


HomeIndexContactView Cart


1 x 48 Eldorado M-75-1041 Precision Deep Hole Gun Drill mounted on Richards Horizontal Boring Mill
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com