3/4 x 30 Eldorado Precision Deep Hole Gun Drill mounted on Lucas horizontal boring mill


3/4" x 30" Eldorado Precision Deep Hole Gun Drill mounted on Lucas horizontal boring mill

Stock Number: hsd75bmx


                                         
Click to view larger photo


SpecificationDescription
Drilling Diameter Maximum.75
Drilling Diameter Minimum.0550"
Maximum Drilling Depth30"
Spindle Speeds1445-11740 RPM
Feed Rate Drilling1-99.9 IPM
Feed Rate Rapid200 IPM
Work Table34" x 60"
Height of Spindle Centerline0-24"
Straightness per 12".001"
Coolant Pressure, Maximum1500 PSI
Reservoir Capacity90 Gallon
Coolant Flo18 GPM
Filtration5 Micron

Equipped With:
Motor Driven With 3 HP, 3 Phase, 60 Cycle 208/230/460 Volt Spindle Drive. 7.5 HP 3 Phase 60 Cycle Coolant System. Complete Electrical Controls. Allen Bradley PLC with Panelview Plus 400 Controller. Ball Screw Driven Drill Feed. Eldorado F18 "Mega Flo" High Pressure Coolant System With Filtration And Heat Exchanger. Ball Screw Driven Headstock Feed System. Chip Box. Whip Guide. Mitutoyo 2-Axis DRO for Table Position and Vertical Head Position. The Drill Is Mounted On A Lucas Boring Mill Machine Base With A 34" x 60" T-Slotted Table. There Is Approximately 60" Longitudinal Table Travel and 24" Vertical Spindle Travel.


HomeIndexContactView Cart


3/4 x 30 Eldorado Precision Deep Hole Gun Drill mounted on Lucas horizontal boring mill
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com