Gleason Model 106 Hypoid Gear Generator


Gleason Model 106 Hypoid Gear Generator

Stock Number: gh1011

Serial No. 30289


                                                              
Click to view larger photo


SpecificationDescription
Cone Distance, max. (30" spiral angle & 7-1/2" cutter)4-1/4"
Gear Pitch diameter, max.10 to 1
10 to 1 ratio8-1/2"
2 to 1 ratio7-1/2"
1 to 1 ratio6"
Diametral Pitch (coarsest)4
Full depth, max..625"
Face width, max.1-1/4"
Number of teeth5 to 150
WORK SPINDLE 
Dia. of taper hole at large end3-29/32"
Taper per foot89/64"
Depth of taper6"
Dia. of hole through spindle2-7/16"
Dia. of spindle nose5-11/82"
Cutter Diameter3-1/2", 4-1/2", 5", 6", 7-1/2"
WORK HEAD 
Offset above center, max.8"
Offset below center, max.8"
Dist. from machine center to nose of spindle, max.9"
Dist. from machine center to nose of spindle, min.1-1/4"
Cutter Speeds54-418 RPM
Feeds (seconds per tooth)5 - 73 seconds
Feed motor5 HP, 1800 RPM
Hydraulic motor1 HP, 1800 RPM
Coolant motor1/2 HP, 8600 RPM
Floor Space84" x 61"
Net Weight15,500 lbs

Equipped With:
Hydraulic Chucking. Rough & Finish Cam Selector. Change Gears. Guarding.


HomeIndexContactView Cart


Gleason Model 106 Hypoid Gear Generator
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com