Gleason No. 463 Hypoid Gear Grinder


Gleason No. 463 Hypoid Gear Grinder

Stock Number: gh1024

Serial No. 801702      Age: 1987


                                                                                          
Click to view larger photo


SpecificationDescription
Maximum Cone Distance, (30-Degree Spiral Angle w/12" Dia Wheel)15"/(381mm)
Maximum Pitch Angle, 90-Degree Shaft 70-Degrees, 34'
Minimum Pitch Angle, 90-Degree Shaft 5-Degrees, 42'
Maximum Pitch Diameter: (90-Degree Shafts) 
0-degree spiral angle, 1:1 ratio15.5"/(393.7mm)
0-degree spiral angle, 3:1 ratio 23"/(584.2mm)
30-degree spiral angle, 1:1 ratio21"/(533.4mm)
30-degree spiral angle, 3:1 ratio31.5"/(800.1mm)
40-degree spiral angle, 1:1 ratio22.5"/(571.5mm)
40-degree spiral angle, 3:1 ratio34"/(863.6mm)
Coarsest DP (Module)2 DP
Coarsest DP (Module) Metric12.7-Module
Maximum Face Width3"/(76.2mm)
Work Spdl Taper Hole Dia.(Large End)3-19/32"
Work Spindle Bore Taper (Per Ft)39/64"
Work Spindle Thru-Hole Diameter3.87"/(98mm)
Std Grind Wheel OD6" - 8"
Std Grind Wheel OD (Metric)1852-203mm
Max. Wkhead Offset Above/Below Ctr4.5"
Max. Wkhead Offset Above/Below Ctr (Metric)114.3mm
Distance From Machine Center To Spindle Nose3"-20.5"
Distance From Machine Center To Spindle Nose (Metric)76-500mm
Feed Rate (Seconds Per Tooth)1.9-11.8
Approx. Floor Space135" x 81"
Approx. Floor Space (Metric)3429x2057mm
Approx. Overall Mach Ht97"
Approx. Overall Mach Ht (Metric)2464mm
Approx. Machine Net Weight23,000 lbs
Approx. Machine Net Weight (Metric)10,455 kGs

Equipped With:
Suitable For The Grinding Of Spiral Bevel, Zerol Bevel, & Hypoid Gears Up To 34" (864mm). Pitch Diameter At 3:1 Ratio, 3" (76.2mm) Face Width & 2 DP (12.5-Module). Side Dresser Block with (3) Dresser Arms. Large Quantity of Change Gears and Cams. Balancing Arbor. Mist Collector. Coolant Filtration System.


HomeIndexContactView Cart


Gleason No. 463 Hypoid Gear Grinder
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com