No. 16-36 Barber-Colman Universal Gear Hobber


No. 16-36 Barber-Colman Universal Gear Hobber

Serial No. 4395      Age: 1972

Stock Number: gh1044


                                         
Click to view larger photo


SpecificationDescription
Capacity in Steel, 1 Cut6 DP (4.2 Mod)
Rated Work Diameter Max.16"
Travel of Hob Carriage Max.36.5"
Distance Work Spindle Face to Tail Center Max.64"
Work Spindle to C/L of Hob Spindle Max.39.5"
Work Spindle to C/L of Hob Spindle Min.3.5"
C/L of Work Spindle to C/L of Hob Spindle Max.9.5"
C/L of Work Spindle to C/L of Hob Spindle Min.1/2"
C/L of Work Spindle to Bottom of Overarm8"
Maximum Hob Diameter5"
Diameter of Work Spindle Bore4-1/8"
Maximum Swivel Angle Setting (Left or Right)45
Hob Speeds59-246 RPM
Hob Arbor (Straight)1.25"
Maximum Index Worm Speed1,500 RPM
Approximate Weight7,000 lbs

Equipped With:
Motor Driven With 5 HP, 3 Phase, 60 Cycle AC Main Drive Motor. 2 HP, 3 Phase, 60 Cycle AC Rapid Traverse Motor. 1 HP, 3 Phase, 60 Cycle AC Hydraulic Pump Motor. 3 Phase, 60 Cycle AC Motor For The Lube Pump and Coolant Pump. With Electrical Control Cabinet, Dwell Timer, Hob Rotation Selector And Operators Control Panel. Presently Wired For 3/60/480V Operation. Double Thread Index. Lever Operated Tailstock. Pneumatically Controlled Collet Chuck. Rapid Traverse Hob Slide. Hob Jog. Trabon Lubrication System. Coolant.


HomeIndexContactView Cart


No. 16-36 Barber-Colman Universal Gear Hobber
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com