Gleason No. 24A Coniflex Straight Bevel Gear Generator combination Rougher/Finisher


Gleason No. 24A "Coniflex" Straight Bevel Gear Generator combination Rougher/Finisher

Stock Number: gh24ax

Serial No. 26843


             
Click to view larger photo


SpecificationDescription
Longest cone distance (1 3/4" stroke)18" (457mm)
Shortest cone distance0
Max. pitch diameter 10 to 1 ratio35.5"
Max. pitch diameter 2 to 1 ratio31.75"
Max. pitch diameter 1 to 1 ratio25"
Min. pitch angle5.42 degrees
Extreme ratio10 to 1
Max. pitch1.25 DP (20.4 module)
Max. pitch angle (shafts at 90 degrees)84.18 degrees
Max. face length6" (152mm)
Index range10-100 inclusive and
  most numbers up to 200
WORK SPINDLE BORE 
Diameter (large end of taper)6"
Taper per foot.75"
Depth of taper6"
Diameter of thru bore5"
Spindle nose to machine center5"-26"
Cutter speeds (strokes per minute)22-170
Feeds (seconds per tooth) (22 feeds)23-645
Floor space required74" x 105"
Machine net weight24,400 lbs

Equipped With:
Suitable for "general jobbing" production of straight bevel (coniflex/crown) gears up to 35.5 (901mm) pitch diameter, (at 10:1 ratio), 6" (125mm) face-width, with cutting capability up to 1.25 DP (20.4 module). Universal feed cam, double-track, for roughing and/or finishing work. Hydraulic chucking attachment (w/draw-bar & nut). Self contained hydraulic system. Stock dividing gauge. Roughing yoke & bushing. (1) set of standard tool-holders. (1) single set-up of change gears for index, roll, ratio of roll, feed and speed. Gleason auto-stop. Guards/covers and operators step platform. Operator's manual, parts list, wiring & hydraulic diagrams.


HomeIndexContactView Cart


Gleason No. 24A Coniflex Straight Bevel Gear Generator combination Rougher/Finisher
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com