Model 26 Gleason Hypoid Gear Generator


Model 26 Gleason Hypoid Gear Generator

Stock Number: gh26dx

Serial No. 632203


                           
Click to view larger photo


SpecificationDescription
Maximum Diameter Gear33"
Cone Distance Max (30 deg. and 18" Cutter)16-1/2"
Max. Pitch Angle: Shaft at 90 Deg84 Deg. 18'
Min. Pitch Angle5 Deg. 42'
Extreme Ratio10:1
Max Face Width4"
Diametral Pitch1-1/2
Diameter of Taper Hole at Large End:6" 152mm
Taper Per Foot3/4" 19mm
Depth of Taper6", 152mm
Diameter of Hole Through5" 127mm
Spindle Nose to Machine Center9-1/4", 235mm
Cutter Diameter9", 12", 16", 18"
Max Offset Above Center4-1/2"
Max Offset Below Center4-1/2"
Max. Distance from Machine Center to Nose of Spindle23-1/2"
Min. Distance from Machine Center to Nose of Spindle5"
Cutter Speeds-Feed Per Minute35-200
Feed (sec./tooth)23 - 333
Main Motor - 2 Speed7.5 HP
Floor Space132" x 101"
Net Weight25,300 lbs

Equipped With:
Modified Roll. Hydraulic Work Holding. Draw Bar. Coolant System. Change Gears. Cutter Bodies Available.


HomeIndexContactView Cart


Model 26 Gleason Hypoid Gear Generator
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com