519 Gleason Universal Angular Hypoid Bevel Gear Tester


519 Gleason Universal Angular Hypoid Bevel Gear Tester

Stock Number: gh519x

Serial No. 631502      Age: 1964


                                         
Click to view larger photo


SpecificationDescription
Max Dia. Of Bevel Gear At 90 Degree Shaft Angle36" (914mm)
Max Dia. Of Bevel Pinion At 90 Degree Shaft Angle12" (305mm)
Max Offset Of Gear Spindle Above Or Below Pinion Spindle Center6" (152mm)
Shaft Angle Range0 To 180 Degrees
Max. Dia. Of Parallel Shaft Gear49" (1245mm)
W/Angular Head Setting W/Max. Offset 
Max. Dia. Of Parallel Shaft Pinion25" (635mm)
W/Angular Head Setting W/Max. Offset 
Max. Center Distance25" (635mm)
Min. Center Distance0" (0.0mm)
Main Motor5 HP
Floor Space90" x 75"
Approx Net Weight10,555 lbs

Equipped With:
For Testing The Running Qualities Of Bevel, Hypoid, Spur And Helical Gears Up To 24" (610mm) Diameter From 0 To 180 Degree Shaft Angle And Up To 36" (914mm) Diameter At 90 Degree Shaft Angle. Manual Chucking Arrangement W/Draw-Bolts. Drive-Head Spindle Bore (6" Dia. X .75" Taper Per Ft. X 2.5" Long). Special Brake-Head Spindle Bore. (3-29/32"Dia. X 39/64"Taper Per Ft., X 3" Long). Pinion Cross Slides. Sine Bar Setup Arrangement. Imperial Scales & Verniers. Ammeter For Checking Brake Load. Full Electrics (Motors/Controls). (Suitable For 3-Phase 50/60 Cycle Operation). Operators Manual, Parts List, Wiring Diagrams.


HomeIndexContactView Cart


519 Gleason Universal Angular Hypoid Bevel Gear Tester
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com