NO. 7VH LEES BRADNER GEAR HOBBER
Stock Number: gh7vhx
Serial No. 7VH-2134
This machine is being offered thoroughly checked out in our shop, cleaned and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant.
Click to view larger photo
Request a quote on stock# gh7vhx
| Specification | Description |
|---|
| Max. Pitch Diameter | 8 W/3" Hob |
| Max. Pitch Diameter | 7 W/3" Hob |
| Max. Face Width | 10" |
| Maximum Helix Angle | 45 Degrees |
| Maximum Hob OD | 4" |
| Maximum Hob Length | 4" |
| Minimum Number of Teeth Cut | 3 |
| Maximum DP | 4 |
| Axial Travel | 12" |
| Hob to Work Spindle Face Maximum | 15-3/8" |
| Hob to Work Spindle Face Minimum | 3-3/8" |
| Hob to Work Minimum | 1/2" |
| Floor Space | 76" x 64" x 96" |
| Height | 79.5" |
| Approximate Weight | 10,000 lbs |
Equipped With:
Complete with:
(A) Convenient height vertical work spindle
(B) Canted Shoulder height operator's control panel
(C) Easily accessible change gear boxes
(D) Sliding splash guards
(E) Removable chip collection pan
(F) Simplified swivel angle setting graduated in minutes,
(G) Digitally selected 0.0001" increment automatic hob shift actuated by a reversible hydraulic motor
(H) Drawbar clamped interchangeable hob arbors,
(I) Troublefree continuous, fully protected high capacity, automatic lubrication system
(J) J.I.C. non-integral, removable hydraulic system mounted on the machine base
Adams Machinery Company
6450 N. Hamlin Ave.
Lincolnwood, IL 60712
847-673-0556
847-673-7636
adams@adamsmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
