Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER

FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER

Stock Number: gh872

Serial No. 36691      Age: 1984

This machine is being offered thoroughly checked out in our shop, cleaned, painted, and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant

Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...       Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER, Click to view larger photo...      
Click to view larger photo

Request A Quote On Our Stock Number: gh872 Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPERRequest a quote on stock# gh872
SpecificationDescription
Maximum Pitch Diameter, External & Internal10"
Maximum Diametrical Pitch: Spur4
Maximum Diametrical Pitch: Helical5
Maximum Face Width2"
Maximum Helix Angle (using 5" Cutter)45°
Maximum OD of Fixture19"
Spindle Stroking Speeds (Variable)33-1300 RPM
Face Plate to Spindle Housing10"
Feed per Stroke.001" - .040"
Number of Cuts per Cycle1, 2 or 3
Approximate Weight12,000 lbs

Equipped With:
Motor Driven With 7.5/3.75 HP, 2-Speed, 3 Phase, 60 Cycle, AC Volt Spindle Drive. Independent DC Rotary Drive For Feeds. 5 HP Hydraulics. MD Coolant. MD Lubrication. Complete Electrical Controls. Tilting Work Spindle Which Can Tilt 10 Degrees From Vertical In Either Direction To Provide Additional Crowing Or Tapering Capability. Spindle Can Also Be Tilted 90 Degrees To Horizontal For Producing Face Gears. 3" Raise. Capacity For Cutting Internal Or External Spur Or Helical Gears And Many Non-Involute Shapes. Built-In Crowning Ability. Variable Speed Infeed For Better Finish And Extended Cutter Tool Life. Cuts And Infeed Rates Are Set By Potentiometers. Infinitely Variable Depth Control. Digital Display For Setting Stroking Speeds For Rough And Finish Cuts. Automatic Braking. 1, 2, 3 Cut Cycles. Automatic Fixture Clamping. Analog LED Table RPM. Coolant. Magnetic Chip Conveyor.


HomeIndexContact


Gear: FELLOWS 10-2 HIGH PRODUCTION GEAR SHAPER
Adams Machinery Company
6450 N. Hamlin Ave.
Lincolnwood, IL 60712
847-673-0556
847-673-7636
adams@adamsmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com