Request a quote on stock# gh919| Specification | Description |
|---|---|
| Longest Cone Distance (2.75" - 3.5" Face) | 12" |
| Longest Cone Distance (1" Face) | 11-1/8" |
| Shortest Cone Distance | 0 |
| Maximum Pitch Angle (Angular Gears) | 105° |
| Maximum Pitch Angle (Shafts at 90 degrees) | 84° 18' |
| Maximum Pitch Angle | 5° 42' |
| Extreme Ratio | 10/1 |
| Longest Face | 3.5" |
| Stroke Length | .5" - 4.25" |
| Index Range (Number of Teeth) | 10-200 |
| Number of Teeth in Miters (Minimum) | 12 |
| Largest Pitch | 3 DP |
| Diameter of taper hole, large end | 3-29/32" |
| Taper per Foot | 39/64" |
| Depth of Taper | 6" |
| Diameter of Hole 15.75" Deep | 3.25" |
| Spindle Nose to Center Line | 2.5" - 15" |
| Diameter of hole through | 3-1/16" |
| Tool Speeds (13) | 65-500 SPM |
| Main Motor | 3 HP 1800 RPM |
| Pump Motor | 1.5 HP 1200 RPM |
| Floor Space | 76" x 56" |
| Net Weight | 13,600 lbs |
