RUSH MODEL 252S SEMI AUTOMATIC DRILL AND TOOL GRINDER
Stock Number: g1118
Serial No. 1554 Age: 1990
This machine is being offered thoroughly checked out in our shop, cleaned and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant.
Click to view larger photo
Request a quote on stock# g1118
| Specification | Description |
|---|
| Capacity | 3/22" - 2" |
| Drill Point Angles | 40° - 180° |
| Maximum Diameter of Tools | 2.5" |
| Shank Diameter | 2" |
| Tilt (Fore and Aft) | 30° |
| Maximum Drill Length | 16" |
| Wheel Diameter | 7" x 1.25" x 1.25" Bore |
| Spindle Hole | 2" |
| Chuck Diameter | 6.5" |
| Infeed | 0.001" |
| Approximate Weight | 590 lbs |
Equipped With:
For Conventional, Thinned Point, Split Pint, Lip Corrected, Web Thinned And Flat Bottom Drills. Tap Sharpening. Ream Sharpening. Endmill Sharpening. Spin And Index Grinding.
Motor Driven with .5 HP, 115/208-230 Volt Single Phase Motor. 6.5" 6-Jaw Chuck. Dual Cam Workhead For Grinding Both Odd And Even Numbered Flutes. Motorized Workhead. Hand Knob For Workhead Indexing And Set-Up. Abrasive Wheel Flute Finger With Dovetail Cross Feed And Micrometer Vertical Adjustment. Direct Angle Setting Device. Rocker Arm Fixture For Flute Indexing. Micrometer Infeed. Miscellaneous Cams. Cabinet Base.
Adams Machinery Company
6450 N. Hamlin Ave.
Lincolnwood, IL 60712
847-673-0556
847-673-7636
adams@adamsmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
