Request a quote on stock# hmcniigatax| Specification | Description |
|---|---|
| Pallet Size | 19.6" x 19.6" |
| Pallet Load Capacity | 1760 lbs |
| X-Axis Travel | 31.5" |
| Y-Axis Travel | 27.6" |
| Z-Axis (Column Travel) | 22.8" |
| Ball Screw Diameter X, Y, Z | 1.8", 2.2", 2" |
| Rapid Traverse X & Y / Z | 787 IPM / 709 IPM |
| Cutting Feed Rate | .04 - 157 IPM |
| Spindle Nose To Table Center | 5.9" - 28.7" |
| Spindle Centerline To Pallet Surface | 0 - 27.6" |
| Max. Work Envelope | 31.5" Dia & Height |
| Spindle Motor | 25 HP / 30 Min |
| Spindle Speeds (2 Ranges) | 20 - 6,500 RPM |
| Spindle Taper | Cat 50 |
| Spindle Diameter | 3.94" |
| Spindle Bearing Diameter | 5.90" |
| Front / Rear Bearing Quantity | (4) / 1 Pair |
| Table Indexing Increments | 1 Degree |
| Index Rotation Time | 4.5 Sec. |
| ATC Capacity | 119 Tools |
| Max. Tool Length X Dia. X Weight | 15.7" x 3.9" x 44 Lbs |
| Axis Drive Motors X & Y / Z | 5 HP / 4.4 HP |
| Hydraulic Pump Motor | 2.9 HP |
